Kohl SMU Mixmohair

Fast mix climbing belts that hold firmly and have excellent glide. With impregnation against snow sticking. Reliable adhesive down to -30°C with membrane.

Do you need reliable tracks that have a long service life, excellent “driving” properties and hold well on frozen snow and in spring snowdrifts? KOHLA SMU Mixmohair climbing tracks are exactly that. With a 50:50 slip and climb ratio, they are ideal for fast ascents of hills. You can then put all your energy into a great descent. A comfortable ascent is supported by the impregnation of the fibers, which prevents snow from sticking to the tracks, and the membrane, which does not let moisture into the glue and thus holds the tracks firmly even in changing conditions throughout the season.

Reliable adhesive in all circumstances

The Austrian manufacturer KOHLA is a leader in adhesive layer technologies and is constantly improving and innovating them. On their proven glue Hot Melt Thousands of ski mountaineers have long relied on:

• also suitable for severe frost – reliably holds even at -30°C
• snow does not get between the skid plate and the belt – maintains excellent grip even on the edges of the ski base
• without the need to use a separation foil or mesh – the glue does not come off
• The glue lasts a long time. – is wear-resistant
• environmentally friendly – free of solvents and other toxic substances
• the belts are going really easy to unstick without brute force

Long-lasting climbing belts

KOHLA SMU Mixmohair belts are designed for frequent use. The combination of high-quality mohair and nylon (65% mohair and 35% nylon) ensures optimal ratio between excellent glide, climbing ability and long service life :

• Mohair has excellent sliding properties, which It saves a lot of energy when climbing.
• Nylon (a synthetic polymer) lends the belts greater resistance and in spring firns it has better wet slipperiness than mohair.
• The entanglement of the “W” fibers, which is more durable, with good slip and holds up well when climbing even on frozen snow.
• The fiber layer is made of a blend of high-quality cotton and polyester – increased resistance to tearing and wear .

Holds firmly even in spring frosts

In order for the climbing belt to hold reliably on the ski slope, the ski slope and the adhesive layer must be dry. If moisture from the snow gets on the adhesive, it stops working, peels off, freezes and does not hold. For this reason, the technology of applying a PU membrane between the layer with the tangled hair and the layer with the applied adhesive is used in these KOHLA SMU Mixmohair climbing belts, and the belts are therefore 100% waterproof . Its You can enjoy your ski tour without worries , because the glue holds firmly , does not freeze and works great even during spring frosts on wet snow.

Impregnated climbing belts

Good climbing straps must hold well on the skis and glide well on the snow. Wet snow can stick to wet straps and there is nothing more annoying than having to drag a half-kilo of snow on your leg. The straps stop sliding and it takes too much force. All KOHLA climbing belts are impregnated with fluorocarbon and snow doesn't stick to them.

• The impregnation repels moisture and thus prevents snow from sticking to the fibers.
• Impregnation improves glide - climbing belts are faster and movement is easier.
• Impregnation increases the durability of the fibers - the riser strips last longer.
• Riser strips dry faster.
• The impregnation is environmentally friendly - free of solvents and toxic substances and is biodegradable.

Still like new

With frequent use or after several seasons, the effect of the impregnation may decrease. In this case, replace it you can easily restore it with a spray KOHLA DRY CLIMB skin impregnation or KOHLA impregnating wax . The wax is small and is convenient to have in your backpack on a hike, especially for multi-day hikes.

Do I attach the straps to my skis?

KOHLA SMU Mixmohair climbing straps can be attached to any ski - you can easily replace the steel eyelet with a different attachment for a different type of tip. The parts are made of high-quality plastic and stainless steel materials that are resistant to frost and wear.

• Tip: fixed T-Bar tip (85 mm) that fits most skis or with a metal (z-Hook) and rubber (i-Fix) hook option for skis with a groove.
• Heel: sewn-in plastic elastic strap and hook (K-Clip + Elastic Strap) which has 12 cm adjustment range . For twin-tip skis use the Butterfly hook.

Will the straps fit the width and cut of my skis?

For the easiest uphill climb, it is important to have as much of the skid plate covered by the belt as possible. That is why It is important to choose the right width and length of the straps . KOHLA SMU Mixmohair climbing straps in the Multifit version are available in a width of 120 mm and in lengths from 149 - 197 cm in 6 cm increments, and you simply cut the straps 2.5 mm from the side to exactly match the shape of your skis.